|
The DS100 is a first-generation Tibbo Serial Device Server that externally connects any existing serial device to an Ethernet (TCP/IP) network. The DS100 features a compact and stylish design. DS100B with universal RS232/422/485 serial port (available through a single DB9M connector, interface selection by DIP switch).
The DS100 Serial Device Server is internally based on the EM100 Ethernet Module.
Features
- Stylish and compact design, dimensions only 89x51x30mm
- Power requirements: 12V DC, app. 80mA
- One 10BaseT Ethernet port
- DS100B: one RS232/422/485 port (RX, TX, RTS, CTS, DTR, DSR*)
- RTS, CTS, DTR, and DSR lines can be used as remotely controlled I/O
- Four LEDs display status information
- Two internal 510-byte routing buffers
- Onboard EEPROM stores numerous user-definable functioning parameters (Setting)
- Supported network protocols include UDP, TCP, ARP, ICMP (PING) and DHCP
- Setup can be performed through the serial port or network (over-the-network IP-address configuration is also supported)
- Specialized "on-the-fly" commands for serial port control, "modem" commands to control network connections, status commands for remote status monitoring, etc.
- Internal firmware is upgradeable through the serial port or network
- Supplied with Device Server Toolkit (DST) for Windows, including Virtual Serial Port Driver (VSPD) (COM redirector)
- LINUX version of the VSPD is also available
- Works with TIBBO.NET
- DS100-B-SK Starter Kit available
- CE- and FCC-approved
* In RS232 mode only. In RS422 the DS100B provides TX+/-, RX+/-, RTS+/-, CTS+/-, in RS485 mode- TX+/-, RX+/-
*For order quantities greater than 10 please contact us for a lower price
| Power Supply Unit (PSU) | |
|
