The EM100 is Tibbo's original 10BaseT Ethernet-to-serial Module for onboard installation. The EM100 is highly integrated and requires only one external component- RJ45 Ethernet connector. The EM100 has the lowest power consumption of all Ethernet Modules offered by Tibbo. Economical pricing makes the Module an ideal choice for low-cost applications.

Features

• Compact, dimensions only 46x28x13mm
• Low power consumption: 40mA@5VDC
• Fully sealed design
• One 10BaseT Ethernet port with built-in Ethernet magnetics
• One serial (TTL) port with full- or half-duplex operation*; baudrates of up to 115200bps; 5 parity modes (none, even, odd, mark, space); 7 or 8 data bits; optional RTS/CTS flow control
• Serial port includes RTS, CTS, DTR, DSR and two additional lines; all lines can be used as remotely controlled I/O
• Four LED lines** provide Module status information
• Two internal 510-byte routing buffers
• Onboard EEPROM stores numerous user-definable functioning parameters (Setting)
• Supported network protocols include UDP, TCP, ARP, ICMP (PING) and DHCP
• Module setup can be performed through the serial port or network (over-the-network IP-address configuration is also supported)
• Specialized "on-the-fly" commands for serial port control, "modem" commands to control network connections, status commands for remote status monitoring, etc.
• Internal firmware is upgradeable through the serial port or network
• Supplied with Device Server Toolkit (DST) for Windows, including Virtual Serial Port Driver (VSPD) (COM redirector)
• LINUX version of the VSPD is also available
• Works with TIBBO.NET
• EM100-SK Starter Kit available
• CE- and FCC-approved

*Full-duplex mode is suitable for RS232 and RS422 comms., half-duplex mode- for RS485 comms. RS232/422/485 transceivers are not built in

**LEDs must be connected externally

more images...

*For order quantities greater than 10 please contact us for a lower price