|
These Kits contain all necessary accessories for fast and convenient evaluation of the DS100R andDS100B Serial Device Servers:
-
WAS-P0004(B) Serial Cable
-
WAS-P0005(B) Serial Cable
-
WAS-1498 Ethernet Cable
-
WAS-1499 Ethernet Cable
-
12V Power Adaptor (US, Euro, UK versions)
-
TB100 Terminal Block Adaptor*
* Supplied with DS100B-SK only
Full Details:
WAS-P0004(B) DS-to-device serial cable
This DB9M-to-DB9F cable is used to connect Tibbo Device Server (Board) to a serial port of your serial device.
Click here for cable wiring data.
Note: WAS-P004(B) supersedes WAS-1404 cable.
|
|
WAS-P0005(B) DS-to-PC serial cable
This DB9F-to-DB9F cable is used to connect Tibbo Device Server (Board) to a COM port of your PC.
Click here for cable wiring data.
Note: WAS-P005(B) supersedes WAS-1455 cable.
|
|
WAS-1499 straight Ethernet cable
This cable is used to connect Tibbo Device Server (Board) to an Ethernet hub (switch).
Click here for cable wiring data.
|
|
WAS-1498 crossover Ethernet cable
This cable is used to connect Tibbo Device Server (Board) directly to another Ethernet device (bypassing the hub).
Click here for cable wiring data.
|
|
12VDC Power Adaptor
All Tibbo Devices and Boards require 12VDC power adaptors (500mA current rating).
| DS100R/B , EM120/EM200-EV, EM100-EV: |
| U.S. |
Europe |
U.K. |
| APR-1014 |
APR-1015A |
APR-1018A |
| EM202-EV-RS, EM202-EV-TM: |
| U.S. |
Europe |
U.K. |
| APR-P0005 |
APR-P0006 |
APR-P0007 |
|
|
TB100 Terminal Block Adaptor
TB100 simplifies installation and wiring of RS422 and RS485 systems. This Adaptor is a small board that plugs into the DB9M serial port connector. The TB100 features a terminal block connector for easy wire attachment, four onboard line terminators (for TX, RX, RTS, and CTS lines) and full-half duplex selector for RS485 communications.
Click here for TB100 documentation.
|
*For order quantities greater than 10 please contact us for a lower price
| Power Supply | |
|
